Provides a smooth, surge free flow of water. May be used with most pump systems and may be mounted in any position. It has an internal pressurized diaphragm to provide a smooth, surge-free flow. It is precharged to 0.9 bars (13psi) but can be recharged if required.
Has 1/2 BSP thread and also adapters to 12mm hose barb.
The difference between just the pulsation dampener and the accumulaor/pulsation dampener is in the way they are made, therefore operate. The pulsation dampener just relies on the water compressing the standard air pressure within the unit - without a diaphragm. The accumulators have the air inside under pressure in the start up stage, so in effect this gives a longer time (more water flow) between stop and start of pump for the same sized unit.